Book a Calibration Downloads Contact Us





The DOCKQ is a maintenance station which charges MICROQ Batteries, both Internal and External (see below). It also connects to a network via Ethernet, allowing seamless integration of your workflow when docking your MICROQ into the DOCKQ Maintenance Bay.

Two DOCKQs are available, the DS10 and the DS20. Both the DS10 and DS20 have the same networking and charging capabilities. The DS20 has been designed for office or laboratory use. The DS10 is easy to transport and can be used in an office or laboratory environment as well as when off-site measurements need to be conducted.

Maximum Dimensions (W x L x H) 183 x 227 x 44 mm (7.2 x 8.94 x 1.73”) 183 x 245 x 86 mm (7.2 x 9.65 x 3.39”)
Weight 1.2 kg (2.65 lbs) 1.6 kg (3.53 lbs)
Operating Humidity 5% - 90% RH 5% - 90% RH
Operating Temperatures 0° C to 60° C 0° C to 60° C
Ingress Protection Rating IP40 IP40
Typical Mounting Table top Table top

MicroQ External Battery


Both Internal and External MICROQ Batteries are Li-Ion batteries, each providing 40 Wh of power. The Internal MICROQ Battery is a built-in battery, providing from 1 - 2 hours operation, depending on the MICROQ’s configuration.

The External MICROQ Battery can be attached to the MICROQ for longer operation time. Multiple External MICROQ Batteries can be hot-swapped for increased uninterrupted operation time.

Type Li-Ion
Capacity 40 Wh Battery power for 1 – 2 hours (depending on system configuration)
Number of Cells 4
Mass of each Cell 48 g
Dimensions (W x L x H) 47 x 145 x 38 mm (1.9 x 5.7 x 1.5”)
Maximum Weight 0.45 kg (1 lbs)
Nominal Voltage 14.4 V
Temperature Range (charging) 0° C to 45° C
Temperature Range (discharging) -20° C to 60° C