MICROQ: SPECIFICATIONS
MICROQ
THE LEAN TETHERED SOLUTION
With DC power, PoE and 2 Modular channel slots, the MICROQ is ready to measure what you want, how quickly you want and at the quality you want.
CONNECTED AND ADAPTABLE
- Accessible open data formats
- Intuitive interaction for setup and control on smart devices
- Cloud capable
INHERENT, HIGH SIGNAL QUALITY
- 24-bit
- 102.4 kSa/s | 204.8 kSa/s | 5 MSa/s
- Calibration (including ISO/IEC 17025)
MODULAR SIGNAL CONDITIONING
Two Module slots for interchangeable channels
- 6 to 12 Channels Charge | Voltage | ICP®
- 8 to 16 Channels Temperature
- 4 to 8 Channels Bridge | Voltage | ICP®
- 2 to 4 Channels High-Speed Bridge and Voltage
- 2 to 4 Channels Microphone | Voltage | ICP®
- 2 to 4 Channels ICP® | Voltage | 2 to 4 Channels Tacho
SPort for ATTOQ:
The SPort supports optional additional ATTOQs, increasing signal conditioning and measurement placement possibilities.
- SGPS:
- Acquire precise time synchronization and position information using a GPS receiver and antenna which can be placed up to 3 m (9.8 ') away from the MICROQ.
- SNAV:
- Inertia assisted GPS for high resolution velocity measurement with speed update rates of up to 100 Hz.
SIMPLIFIED CABLING
One Cable for Power, Ethernet and Synchronization
- PoE (Power over Ethernet):
- Ethernet: 1000BASE-T
- Data transfer at 45 MB/s
- PTP (Precision Time Protocol):
- Synchronization over PTP IEEE (1588-2008) with other MICROQs, MICROQ black editions, DECAQs and other PTP compatible devices.
DC POWER
- 10 - 30 VDC, LEMO® connector
RUGGED
- High quality exterior design and finish
- Machined from aluminium
- Conduction cooled
CHOICE OF BUILT-IN CHANNELS TO ADD:
2 Tacho Channels
20 ns | 1 MPulse/s
2 CAN or CAN FD Channels
HDI: High Definition Interface
2 ICP® Channels with 2 Analog Output Channels
Supports a headset.
MICROQ INDEPENDENT
PERFECT FOR PORTABLE, STANDALONE APPLICATIONS
The MICROQ can be both a lean tethered solution and a great adventurer.
With added built-in GPS, Wi-Fi, a 128 GB SSD and hot-swappable batteries for portable, untethered operation, the MICROQ independent (MICROQ i) is mobility defined.
Perfect for mobile standalone applications, the MICROQ i lets you measure what you want at laboratory quality, without keeping you there.
CONNECTED AND ADAPTABLE
- Accessible open data formats
- Intuitive interaction for setup and control on smart devices
- Cloud capable
INHERENT, HIGH SIGNAL QUALITY
- 24-bit
- 102.4 kSa/s | 204.8 kSa/s | 5 MSa/s
- Calibration (including ISO/IEC 17025)
MODULAR SIGNAL CONDITIONING
Two Module slots for interchangeable channels
- 6 to 12 Channels Charge | Voltage | ICP®
- 8 to 16 Channels Temperature
- 4 to 8 Channels Bridge | Voltage | ICP®
- 2 to 4 Channels High-Speed Bridge and Voltage
- 2 to 4 Channels Microphone | Voltage | ICP®
- 2 to 4 Channels ICP® | Voltage | 2 to 4 Channels Tacho
SPort for ATTOQ:
The SPort supports optional additional ATTOQs, increasing signal conditioning and measurement placement possibilities.
- SGPS:
- Acquire precise time synchronization and position information using a GPS receiver and antenna which can be placed up to 3 m (9.8 ') away from the MICROQ.
- SNAV:
- Inertia assisted GPS for high resolution velocity measurement with speed update rates of up to 100 Hz.
SIMPLIFIED CABLING
One Cable for Power, Ethernet and Synchronization
- PoE (Power over Ethernet):
- Ethernet: 1000BASE-T
- Data transfer at 45 MB/s
- PTP (Precision Time Protocol):
- Synchronization over PTP IEEE (1588-2008) with other MICROQs, MICROQ black editions, DECAQs and other PTP compatible devices.
DC POWER
- 10 - 30 VDC, LEMO® connector
RUGGED
- High quality exterior design and finish
- Machined from aluminium
- Conduction cooled
Wi-Fi
GPS Channel
Built-in 128 GB SSD
Built-in Internal MICROQ Battery
Li-Ion battery with smart power modes to optimize power usage and extend operation time.
Supports optional External MICROQ Batteries
Li-Ion Battery. Hot-swap for increased uninterrupted measurement time.
Supports the DOCKQ
Maintenance station for sharing data and charging the MICROQ and External MICROQ Batteries.
CHOICE OF BUILT-IN CHANNELS TO ADD:
2 Tacho Channels
20 ns | 1 MPulse/s
2 CAN or CAN FD Channels
HDI: High Definition Interface
2 ICP® Channels with 2 Analog Output Channels
Supports a headset.
MICROQ BLACK: SPECIFICATIONS
MICROQ black
COMPACT OUT-OF-THE-BOX
MEASUREMENTS
Plug in and measure with high quality built-in ICP® and CAN / CAN FD channels. Get just what you need, with 100% data confidence. Grow your system by synchronizing your MICROQ black tethered with any other QuantusSeries PTP compatible system and/or use your SPort to add even more measurement parameters to your setup.
CONNECTED AND ADAPTABLE
- Accessible open data formats
- Intuitive interaction for setup and control on smart devices
- Cloud capable
INHERENT, HIGH SIGNAL QUALITY
- 24-bit
- Calibration (including ISO/IEC 17025)
MODULAR SIGNAL CONDITIONING
SPort and XPort for ATTOQs:
The SPort and XPort (coming soon) support optional additional ATTOQs, increasing signal conditioning and measurement placement possibilities.
- SGPS:
- Acquire precise time synchronization and position information using a GPS receiver and antenna which can be placed up to 3 m (9.8 ') away from the MICROQ.
- SNAV:
- Inertia assisted GPS for high resolution velocity measurement with speed update rates of up to 100 Hz.
SIMPLIFIED CABLING
One Cable for Power, Ethernet and Synchronization
- PoE (Power over Ethernet):
- Ethernet: 1000BASE-T
- Data transfer at 45 MB/s
- PTP (Precision Time Protocol):
- Synchronization over PTP IEEE (1588-2008) with other MICROQs, DECAQs and other PTP compatible devices.
DC POWER
- 10 - 30 VDC, LEMO® connector
RUGGED
- High quality exterior design and finish
- Machined from aluminium
- Conduction cooled
2 ICP® channels (BNC connectors)
CAN / CAN FD
MICROQ black INDEPENDENT
NO-FUSS, PORTABLE STANDALONE
MEASUREMENTS
The MICROQ black independent provides out-of-the-box systems for measurements on the go. Use your internal battery to conduct standalone measurements with the same high-quality signal conditioning you’ll get from any other QuantusSeries system.
CONNECTED AND ADAPTABLE
- Accessible open data formats
- Intuitive interaction for setup and control on smart devices
- Cloud capable
INHERENT, HIGH SIGNAL QUALITY
- 24-bit
- Calibration (including ISO/IEC 17025)
MODULAR SIGNAL CONDITIONING
SPort and XPort for ATTOQs:
The SPort and XPort (coming soon) support optional additional ATTOQs, increasing signal conditioning and measurement placement possibilities.
- SGPS:
- Acquire precise time synchronization and position information using a GPS receiver and antenna which can be placed up to 3 m (9.8 ') away from the MICROQ.
- SNAV:
- Inertia assisted GPS for high resolution velocity measurement with speed update rates of up to 100 Hz.
SIMPLIFIED CABLING
One Cable for Power, Ethernet and Synchronization
- PoE (Power over Ethernet):
- Ethernet: 1000BASE-T
- Data transfer at 45 MB/s
- PTP (Precision Time Protocol):
- Synchronization over PTP IEEE (1588-2008) with other MICROQs, DECAQs and other PTP compatible devices.
DC POWER
- 10 - 30 VDC, LEMO® connector
RUGGED
- High quality exterior design and finish
- Machined from aluminium
- Conduction cooled
2 ICP® channels (BNC connectors)
CAN / CAN FD
WiFi
GPS
Built-in SSD
Built-in Internal Battery
